Mobile wireless truck and heavy-duty vehicle lift set – 6×8.5t (51t)

Mobile wireless truck and heavy-duty vehicle lift set – 6×8.5t (51t)

A professional heavy-duty lifting system designed for safe, fully synchronised lifting of trucks, buses and large commercial vehicles. The standard 6-column configuration provides a total lifting capacity of 51,000 kg, with 8,500 kg per column. Built for workshop use where accuracy, safety and reliability are non-negotiable.

Key features

• 8,500 kg lifting capacity per column
• 51,000 kg total capacity (6 columns)
• Electro-hydraulic drive system
• Industrial wireless radio synchronisation
• Integrated 24V DC control system
• Touchscreen operator panel
• Mechanical and electromagnetic safety locking
• Adjustable wheel lift arms
• Built-in hydraulic moving kit
• Built-in batteries and hydraulic oil
• Dual-battery system per column
• Designed specifically for indoor use

⚠️ Maximum overall height – IMPORTANT

• Overall height of each column: 3,680 mm
• Recommended minimum ceiling height: over 4,000 mm to allow safe lifting clearance
• When choosing ceiling height, also factor in the vehicle’s base height

Wireless synchronisation system

The columns communicate via a closed industrial radio system, not standard WiFi.

• No router required
• No workshop network connection needed
• Secure internal radio communication
• Minimum 2, maximum 32 columns per system
• Any column can act as the master/control column
• Each column is equipped with a displacement sensor transmitting height data in real time

Automatic deviation monitoring:

• 15–30 mm deviation → hydraulic correction activates
• 30–60 mm deviation → extended correction
• Over 60 mm → system disables movement

This ensures accurate, synchronised lifting even under full load.

Safety system

The lift integrates multiple levels of safety:

• Mechanical safety lock with audible engagement
• Electromagnetic locking mechanism
• Overflow valve (overload protection)
• Anti-leak valve
• Hydraulic anti-drop protection
• Emergency stop button
• Arm locking mechanism

Continuous audible warning during lowering in the range below the last lock position. In case of hydraulic pressure loss, the mechanical lock prevents sudden drop.

Control system

Master column functions:

• Touchscreen display
• UP / DOWN control
• LOCK function
• Hydraulic ON/OFF switch
• Emergency stop
• Zero level setting
• Maximum height setting
• Synchronisation assist function
• Fault code diagnostics

The columns can be operated together (all columns), individually, or in axle pairs.

Lifting arms

• Adjustable arm spacing to match wheel diameter
• Manual locking mechanism
• Position locking to prevent slipping
• Must be fully locked before lifting

Moving system

Each column includes a hydraulic trolley-jack-style moving kit:

• Operated with a tiller handle
• The rear wheels lift the base plate off the floor
• Easy positioning under the vehicle wheels
• Before lifting, the base must sit fully flat on the floor
• Lifting while moving is strictly prohibited

Battery and power supply

• 24V DC system
• Dual-battery configuration per column
• Charging required below 20% state of charge
• Built-in charger electronics with 230V mains connection and spiral power cable

Technical specifications (per column)

• Drive type: Electro-hydraulic
• Lifting capacity: 8,500 kg
• Total capacity (6 columns): 51,000 kg
• Lifting height: 1,750 mm
• Maximum column height: 3,680 mm
• Overall width: 1,410 mm
• Motor power: 3.0 kW
• Voltage: 24V DC
• Column weight: 810 kg
• Noise level: <85 dB
• Operating temperature: 5–40°C
• Storage temperature: -25°C to +55°C
• Installation altitude: ≤1,000 m above sea level
• Installation location: Indoor use only

Operating requirements

• Concrete floor only
• Minimum concrete thickness: ≥200 mm
• Minimum concrete strength: ≥3,000 PSI (2.1 kg/mm²)
• Floor must be flat and level
• Minimum 1,200 mm clearance from walls
• Not suitable for asphalt floors
• Not suitable for outdoor use
• The electrical cabinet is ventilated and not splash-proof
• Recommended minimum ceiling height: 4,000 mm + vehicle height allowance

Maintenance requirements

• Monthly lubrication of bearings and moving parts
• Monthly lubrication of safety locks and cables
• Hydraulic oil change once per year
• Daily inspection of the safety system
• Pressure relief valve adjustment must be carried out by qualified personnel only
• Use filtered, clean hydraulic oil
• Lockout/Tagout required before service

Transport instructions

• Transport height per column: 2,600 mm
• Weight of 6-column set: approx. 4,860 kg
• Weight per column: 810 kg (including batteries and oil)

Transport conditions:

• Upright position only
• Securely fastened during transport
• Enclosed truck with sufficient internal height, or an open flatbed vehicle
• The vehicle must have adequate payload capacity

Regulatory compliance

Installation, commissioning, lift inspection and operator obligations must be carried out in accordance with applicable local regulations and safety standards. Non-compliance may void the warranty.