Onboard brake disc lathe machine

Description

Using your old discs by grinding it, instead of replacing it, will provide you with both economic gain and a safer journey contrary to popular belief. Because old brake discs become harder under high pressure and heat during use. If the brake discs meet the manufacturer's standards, grinding them and reusing them is a safe and economical choice for both you and your vehicle.

The Brake Disc Lathe Machine is designed in such a way that the user can easily place the lathe on the vehicle and perform the most efficient turning operation as soon as possible. The advantage of completing lathe process on your vehicle without removing the disc is that you have performed the lathe operation without losing the balance of the brake disc. In addition, the whole process is done in very short time.

Thanks to the high quality diamond bits and the lathe setting that allows you to make precise adjustments, you can do lathe with a thickness of 0.004mm. Also, thanks to the alarm on it, you can take care of your other works during the process. Because when the lathe process is finished, the machine will automatically stop and warn you audibly.

By two legs, short and long, sent with the machine, applications can be made on lift, on jack and on desks. It has two different sized body legs (longer and shorter). The longer one is for using it when the vehicle is on lift. The height is adjustable within +,-6cm range. The shorther leg is for using it when the vehicle is on the ground.

Specifications

• Max. disc thickness: 42mm
• Min. disc diameter: 150mm
• Max. disc diameter : 320mm
• Motor: 220V, 50HZ, 4.5A, 0.55KW, Monofaze