Onboard Brake Disc Lathe Machine

Description

Using your old discs by grinding it, instead of replacing it, will provide you with both economic gain and a safer journey contrary to popular belief. Because old brake discs become harder under high pressure and heat during use. If the brake discs meet the manufacturer's standards, grinding them and reusing them is a safe and economical choice for both you and your vehicle.

The Brake Disc Lathe Machine is designed in such a way that the user can easily place the lathe on the vehicle and perform the most efficient turning operation as soon as possible. The advantage of completing lathe process on your vehicle without removing the disc is that you have performed the lathe operation without losing the balance of the brake disc. In addition, the whole process is done in very short time.

Thanks to the high quality diamond bits and the lathe setting that allows you to make precise adjustments, you can do lathe with a thickness of 0.004mm. Also, thanks to the alarm on it, you can take care of your other works during the process. Because when the lathe process is finished, the machine will automatically stop and warn you audibly.

It has a lifting mechanism with a rotating handle on top, which can be used to practically adjust its height from the ground between 30-60 cm. The lowest is 30 cm from the ground and max. It is 60 cm from the ground. So it has a range of 30 cm.

Specifications

• Adjustable height 30-60cm
• Max. disc thickness: 42mm
• Min. disc diameter: 150mm
• Max. disc diameter : 320mm
• Motor: 220V, 50HZ, 4.5A, 0.55KW, Monofaze