Pulley puller, universal

Specifications

• It allows you to work quickly, so you can save time
• It can be used to avoid damage to the timing wheel
• It is also suitable for removing the injection pump gear
• The tool is designed to be used in many types of cars
• 8 grooves were created on the pull disc, which thus provides several options for attaching the pull arms
• It is equipped with 3 pull levers, the design of which fits well in the control wheel
• 18mm puller nails
• The levers can be fixed in the correct position on the disc using nuts
• It can be driven with a 24mm key
• Max. grip 75mm min 45mm

When using it, first determine how many drawbars you can use. If possible, use all three pull levers. Try a lever to see if it fits properly in the wheel. Lubricate the threaded pull spindle with a suitable grade of grease. Place the tool on the timing wheel and fasten it tightly. Make sure the ball on the end of the threaded pull spindle is pressing against a smooth surface. Turn the pull spindle using a 24mm wrench until the tool pulls the wheel off.