Ball joint separator set, 3pcs

Description

Ball joint separator designed for removing the track rod end from the steering arm without doing damage to the taper pin. Suitable for most small cars and light vans.

Contents

• Parallel type separator: For extruding ball pins on the steering arm, tie rod, steering knuckle, stabilizer bar and tie rod. For use on almost all vehicles. Large clamping range due to stepless adjustment and rotation of the lower part. Actuated by a 19mm wrench. Jaw spacing: 19.5mm. Adjustable clamping range: 20-50mm.
• Scissor type separator: For extruding ball joint pins on tie rods, stabilizers, connecting rods. Fork width: 22-18mm. Drive: 21mm wrench (external hexagon). Release spindle with M16 x 1.5mm thread, with the ball as center point. Clamping range adjustable in two positions: 25 or 55mm. Length: 156mm
• C-type separator: Forged and galvanized tie rod end puller. Jaw width: 19mm. Clamping depth: 22mm. Puller width: 40mm. Overall bolt length: 71mm (thread M12x1.75). Overall height: 71mm. Drive: hexagonal (19mm)